Proper pump installation and regular maintenance are essential to ensuring performance, safety, and long-term reliability. This section is your go-to resource for practical, easy-to-follow guides tailored to mining, industrial, and manufacturing environments.
Explore step-by-step procedures, troubleshooting tips, and preventative care strategies designed to minimise downtime and maximise pump life.
Step-by-Step Installation Checklists
Whether you’re commissioning a new slurry pump or replacing a dosing pump, our installation checklists help ensure nothing gets missed. Topics covered include:
- Think ahead – Install for maintenance
- Site preparation and baseplate leveling
- Pipe alignment and stress checks
- Electrical and VFD setup
- Priming and first run protocols
Troubleshooting Common Issues
Unexpected pump failure? Unstable flow? Our diagnostic resources walk you through:
- Loss of prime
- Seal or hose leaks
- Flow drops or surging
- Overheating and cavitation
Each guide includes probable causes, step-by-step checks, and recommended fixes.
Vibration & Noise: Causes and Fixes
Excessive vibration and noise can signal bigger problems. Learn how to identify and solve:
- Misalignment and unbalanced rotating parts
- Loose components or foundation issues
- Air entrainment and cavitation
- Pipe strain and resonance
Pump and Motor Alignment
Incorrect alignment leads to premature bearing and coupling failure. Our visual guide and tools cover:
- Laser and dial indicator alignment methods
- Acceptable tolerance standards
- Hot vs. cold alignment procedures
Hose & Seal Replacement Intervals
Stay ahead of failure by following time-based or condition-based maintenance. Our recommendations vary by pump type and fluid:
- Peristaltic hose wear rates
- Mechanical seal life indicators
- Diaphragm and O-ring replacement timing
Lubrication & Bearing Care
Bearings are a critical wear point in any pump. Find out:
- Recommended grease types and intervals
- Signs of over or under-lubrication
- Bearing housing inspection procedures